Unicrown Thru-Axle Fork for Wolverine

The Wolverine has usually been paired with a lugged crown fork for traditional QR hubs. For those who want a stiffer, more modern fork we offer this. The 15mm thru-axle works for the most up to date MTB hubs. The unicrown design is slightly stiffer and may reduce the incidence of fork wobble when braking hard. This fork can be run with other frames if their geometry and specs are comparable to the Wolverine.
- Tange Infinity CrMo steel
- 400mm axle to crown
- 50mm rake
- IS disc brake mount
- 1-1/8" steerer - Fits 700c x 45mm with fenders (tire clearance on this fork is tighter than the clearance on the lugged fork)

purchase!

Unicrown Thru-Axle Fork for Wolverine

  • Can this be run on other gravel bikes or the Soma Double Cross?

    The only difference between this fork and the one that goes on the Double Cross is 6mm of extra rake. Length is nearly the same, so it won't alter head angle. We deem it a safe change, but some may notice quicker handling if you swap in this fork.
    On other gravel bikes, you need to know if the frame can run a 1-1/8" steerer and you also need to know the rake, and length of the current fork. Difference of 10mm of length don't make much of a difference. Rake differences can make have a slight effect on steering feel. Most gravel bikes these days do have forks with 50mm rakes, so there is a good chance for compatibility.